Klüberbeta VR 87-883

Nr produktu: 022257 Special lubricant, sliding and sealing agent for valves and fittings

Klüberbeta VR 87-883 is a speciality lubricant based on silicone oil and contains light-coloured solid lubricants. It offers high thermal stability in the tribo-system, even under the influence of highly varied ambient conditions.

Klüberbeta VR 87-883 offers good adhesion to various materials and their surfaces. While even friction points that are hard to access or narrow lubrication gaps are reliably wetted, the lubricant does not tend to flow off where the component geometry is unfavourable, e.g. in vertical arrangements or moving friction points.

Ważna informacja dotycząca kart charakterystyki / Zastrzeżenie

Karty charakterystyki (SDS) udostępnione w tej sekcji do pobrania służą wyłącznie celom informacyjnym. Ze względu na aktualizacje techniczne nie możemy zagwarantować, że pliki dostępne online zawsze odzwierciedlają ich najbardziej aktualny stan.

Jedyną prawnie wiążącą wersją jest karta charakterystyki przekazana bezpośrednio przy zakupie lub dostawie towaru. Ten dokument zawiera szczegółowe informacje dotyczące bezpieczeństwa obowiązujące dla dostarczonego produktu.

Przed użyciem prosimy porównać wszystkie pobrane pliki z dokumentami otrzymanymi wraz z dostawą. Nie ponosimy odpowiedzialności za szkody wynikające z korzystania z nieaktualnych wersji online, chyba że zostały spowodowane umyślnie lub w wyniku rażącego niedbalstwa z naszej strony.

Jeśli nie masz pewności, czy posiadasz najnowszą wersję lub potrzebujesz zaktualizowanego dokumentu, skontaktuj się z naszym działem obsługi klienta pod adresem e-mail: sales@pl.klueber.com

Klüberbeta VR 87-883

Korzyści związane z Państwa aplikacją

  • Extended component service life due to
    • High thermal stability and very good low-temperature behaviour
    • neutral behaviour towards elastomers, plastics and metals
    • good resistance to media and sealing effect e.g. towards disinfectants and cleaning agents
    • very good resistance to both cold and hot water
  • Operational smoothness and prevention of stick-slip due to
    • very low temperature dependence of lubricant film
    • very good and durable wetting of friction points
    • reduced friction and wear in a multitude of material combinations
  • Certified acc. to globally leading standards for lubricants used for valves and fittings, e.g. guideline of the German Environmental Agency (UBA) BWGL-KTW, NSF/ANSI/CAN 61, WRAS, ACS, AS4020 and NSF H1 (further standards on request) and DIN-DVGW-type examination certificate acc. to DIN EN 377 class E (…160 °C) as lubricant for use in equipment and actuators for fuel gases

Odwiedź nasz sklep internetowy

Nasze produkty są teraz jeszcze bliżej Ciebie.

Skontaktuj się z nami

Chętnie pomożemy klientom biznesowym, partnerom biznesowym i profesjonalnym użytkownikom we wszelkich zapytaniach związanych z Klüber Lubrication.
Czekamy na Twoje zapytanie!