Klüberbio RM 8-100

Tuotenumero: 009072 Eco-compatible, synthetic stern tube oil

Klüberbio RM 8-100 is a synthetic, ultimately biodegradable stern tube oil with excellent ageing and oxidation stability. The oil is also highly resistant to contact with water.

Klüberbio RM 8-100 shows very high shear stability and forms a strong, hydrodynamic oil film also under high loads.

As the lubricant is ultimately biodegradable and a very good compatibility with FKM-based propeller shaft seals reduces the risk of oil loss or leakage and therefore environmental impact. The product complies also with the U.S. Environmental Protection Agency's requirements for classification as an Environmentally Acceptable Lubricant (EAL) in terms of biodegradability, toxicity and bioaccumulation standards according to Appendix A of the EPA's Vessel General Permit (VGP).

Tärkeä huomautus koskien käyttöturvallisuustiedotteita / Vastuuvapauslauseke

Tässä latausosiossa tarjotut käyttöturvallisuustiedotteet (SDS) on tarkoitettu vain yleisiin tiedotustarkoituksiin. Teknisten päivitysten vuoksi emme voi taata, että verkossa saatavilla olevat tiedostot aina heijastavat ajantasaisinta tilannetta.

Ainoa oikeudellisesti sitova versio on käyttöturvallisuustiedote, joka toimitetaan suoraan sinulle oston tai tavaroiden toimituksen yhteydessä. Tämä asiakirja sisältää tuotettasi koskevat erityiset turvallisuustiedot.

Tarkista ennen käyttöä kaikki ladatut tiedostot verrattuna toimituksen mukana saamiisi asiakirjoihin. Emme ota vastuuta vahingoista, jotka johtuvat vanhentuneiden verkkoversioiden käytöstä, ellei vahinko ole aiheutunut tahallisesti tai törkeän huolimattomasti meidän puoleltamme.

Jos et ole varma, onko sinulla uusin versio tai tarvitset päivitetyn asiakirjan, ota rohkeasti yhteyttä asiakaspalveluumme.

Klüberbio RM 8-100

Käyttöedut sovellukseesi

  • Complies with the requirements for Environmentally Acceptable Lubricants as defined in Appendix A of the EPA 2013 VGP (Vessel General Permit)
  • Ultimately biodegradable and non-toxic to marine organisms, reducing harm to the environment in the event of leakage
  • FKM elastomers used by leading propeller shaft seal manufacturers are resistant to Klüberbio RM 8-100 and have been approved accordingly. This helps prevent leakages and contamination
  • High operational reliability due to the formation of a strong, hydrodynamic oil film
  • service life extention resulting in long oil drain intervals due to high resistance to contact with water

Ota yhteyttä

Autamme mielellämme yritysasiakkaita, liikekumppaneita ja ammattikäyttäjiä kaikissa Klüber Lubricationiin liittyvissä tiedusteluissa.
Odotamme yhteydenottoasi!

Saadaksesi lisätietoja, kuinka käytämme tietojasi yhteydenottopyynnöstä, ole hyvä ja tutustu tietosuojailmoitus.