Shop Søg Kontakt os

UNISILKON LCA 3801

Vare-nr.: 022100 Special lubricating grease for drinking water valves and non-metallic material combinations

UNISILKON LCA 3801 is a special lubricating grease neutral in odour and taste and based on silicone oil and a calcium soap. It has been developed primarily for valves and fittings as well as sanitary applications. UNISILKON LCA 3801 provides effective wetting even in narrow lubricating gaps and friction points that are difficult to reach.

Uniform operational smoothness is achieved with cold or hot water as the viscosity is not strongly influenced by changing temperatures, e.g. in single-lever mixers with specific surface pressures up to approx. 4 N/mm², depending on the design of ceramic cartridges.

UNISILKON LCA 3801 is resistant to many media used in the beverage industry and to acid or alkaline disinfectants but not resistant to most organic solvents and strong acids or lyes.

Vigtig meddelelse vedrørende sikkerhedsdatablade / Ansvarsfraskrivelse

De sikkerhedsdatablade (SDS), der er tilgængelige i denne downloadsektion, er kun til generelle informationsformål. På grund af tekniske opdateringer kan vi ikke garantere, at de tilgængelige onlinefiler altid afspejler den nyeste status.

Den eneste juridisk bindende version er det sikkerhedsdatablad, der sendes direkte til dig ved køb eller levering af varerne. Dette dokument indeholder de specifikke sikkerhedsoplysninger, der gælder for dit leverede produkt.

Kontroller venligst alle downloadede filer mod de dokumenter, du har modtaget sammen med din levering, før brug. Vi påtager os intet ansvar for skader, der opstår som følge af brug af forældede onlineversioner, medmindre de er forårsaget med forsæt eller grov uagtsomhed fra vores side.

Hvis du er usikker på, om du har den nyeste version eller har brug for et opdateret dokument, er du velkommen til at kontakte vores kundeservice.
UNISILKON LCA 3801

Fordele for din applikation

  • For all types of material combinations like ceramics/ceramics, metal/plastic or elastomers
  • With load-bearing areas between 50 and 99.9 %, good wetting behaviour and good adhesion to different material surfaces, the product ensures consistent smooth operation over the entire lifetime of the component
  • Operating torque nearly constant under changing temperatures, enabling constant smooth operation up to an admissible surface pressure of approx. 4 N/mm²
  • Very good resistance to both cold and hot water
  • Good thermal stability even when applied in a thin film ensures a long functional lifetime of ceramic disc cartridges
  • Good sealing effect and backflow from "lubricant depot"
  • Compatible with most ceramics, metals, elastomers and plastics
  • Approved acc. to BWGL-KTW (UBA guideline), NSF/ANSI/CAN 61, ACS (further approvals on request) for use in all friction points exposed to water or in permanent contact with drinking water

Kontakt os

We look forward to your inquiry!

For yderligere information om behandlingen af ​​dine data ved brug af kontaktformularen henvises til vores databeskyttelseserklæring.