Shop Søg Kontakt os

UNISILKON L 641

Vare-nr.: 022121 Special grease for drinking water, beverage and heating valves

UNISILKON L 641 is a special lubricating grease based on silicone oil and PTFE for valves and other elements in the heating, beverage and sanitary sector. UNISILKON L 641 offers good penetration ability in small lubrication gaps and lube points of difficult access. As its viscosity is rather independent from service temperatures, UNISILKON L 641 allows constant actuating forces within the whole cold/hot water range of single-lever mixer taps. Due to its chemical composition, UNISILKON L 641 has shown to be resistant to various substances in the food-processing and beverage industries like beer, milk, juices, liquors, acid and alkaline disinfectants. UNISILKON L 641 is not compatible with most organic solvents as well as strong acid and alkaline solutions.

UNISILKON L 641 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of UNISILKON L 641 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Vigtig meddelelse vedrørende sikkerhedsdatablade / Ansvarsfraskrivelse

De sikkerhedsdatablade (SDS), der er tilgængelige i denne downloadsektion, er kun til generelle informationsformål. På grund af tekniske opdateringer kan vi ikke garantere, at de tilgængelige onlinefiler altid afspejler den nyeste status.

Den eneste juridisk bindende version er det sikkerhedsdatablad, der sendes direkte til dig ved køb eller levering af varerne. Dette dokument indeholder de specifikke sikkerhedsoplysninger, der gælder for dit leverede produkt.

Kontroller venligst alle downloadede filer mod de dokumenter, du har modtaget sammen med din levering, før brug. Vi påtager os intet ansvar for skader, der opstår som følge af brug af forældede onlineversioner, medmindre de er forårsaget med forsæt eller grov uagtsomhed fra vores side.

Hvis du er usikker på, om du har den nyeste version eller har brug for et opdateret dokument, er du velkommen til at kontakte vores kundeservice.
UNISILKON L 641

Fordele for din applikation

  • Excellent wetting power
  • Operational smoothness due to a good viscosity-temperature behaviour
  • Very good resistance to water and water vapour
  • High thermal stability
  • Good sealing effect
  • Neutral towards metals, many elastomers and plastics
  • NSF H1 registered
  • Tested acc. to BWGL-KTW (UBA guideline), WRAS, ACS and NSF/ANSI/CAN 61 as well as DIN-DVGW-type examination certificate acc. to DIN EN 377 class E (…160 °C) as lubricant for application in equipment and actuators for fuel gases

Kontakt os

Vi hjælper gerne erhvervskunder, forretningspartnere og professionelle brugere med eventuelle forespørgsler relateret til Klüber Lubrication.
Vi ser frem til din henvendelse!

For yderligere information om behandlingen af ​​dine data ved brug af kontaktformularen henvises til vores databeskyttelseserklæring.