Shop Søg Kontakt os

PRESSPATE TB

Vare-nr.: 043104 High-performance lubricants for cold forming of sheets and tubes

In your metal forming operations, the challenge is to find a reliable lubricant that protects tools against wear. Upon completion of the forming process, the lubricant should be easily removed.

In this respect, PRESSPATE SEM 95/800 T and PRESSPATE TB can offer optimal support. Both products offer excellent lubrication performance especially when used for the cold forming of thick or thin metal sheets or tubes. This ensures easier process start-up even under difficult ambient conditions leading to a reduction of reject rates.

Due to the very good lubricating performance, PRESSPATE SEM 95/800 T and PRESSPATE TB pastes can be applied in small quantities. Consequently, components are easy to clean using aqueous systems.

PRESSPATE SEM 95/800 T has been tried and tested with numerous applications. For more taxing bending processes requiring higher performance, PRESSPATE TB should be given preference.

Vigtig meddelelse vedrørende sikkerhedsdatablade / Ansvarsfraskrivelse

De sikkerhedsdatablade (SDS), der er tilgængelige i denne downloadsektion, er kun til generelle informationsformål. På grund af tekniske opdateringer kan vi ikke garantere, at de tilgængelige onlinefiler altid afspejler den nyeste status.

Den eneste juridisk bindende version er det sikkerhedsdatablad, der sendes direkte til dig ved køb eller levering af varerne. Dette dokument indeholder de specifikke sikkerhedsoplysninger, der gælder for dit leverede produkt.

Kontroller venligst alle downloadede filer mod de dokumenter, du har modtaget sammen med din levering, før brug. Vi påtager os intet ansvar for skader, der opstår som følge af brug af forældede onlineversioner, medmindre de er forårsaget med forsæt eller grov uagtsomhed fra vores side.

Hvis du er usikker på, om du har den nyeste version eller har brug for et opdateret dokument, er du velkommen til at kontakte vores kundeservice.
PRESSPATE TB

Fordele for din applikation

  • Reduction of friction and wear, especially in deep-drawing and bending operations involving high degrees of deformation
  • Improving process stability for a lower reject rate
  • Increasing tool life; reduction of tooling costs and set-up times compared with conventional, fluid metal forming oils
  • Workpieces can be cleaned using conventional cleaning agents and processes

Kontakt os

We look forward to your inquiry!

For yderligere information om behandlingen af ​​dine data ved brug af kontaktformularen henvises til vores databeskyttelseserklæring.