Klüberbeta VR 67-17002

Vare-nr.: 022225 Special soft grease for sanitary and heating valves and taps

Klüberbeta VR 67-17002 is a pasty, whitish special grease for valves and fittings. It is based on silicone oils which comply with drinking water regulations. It shows a high dynamic viscosity which is relatively insensitive to temperature.

Klüberbeta VR 67-17002 is a thixotrope product, i.e. it behaves like a consistent lubricant when at rest, while under dynamic load it begins to flow. The product thus combines sufficient wetting of the friction point and hence sound lubrication with a good sealing effect and adhesion.

Klüberbeta VR 67-17002 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberbeta VR 67-17002 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Vigtig meddelelse vedrørende sikkerhedsdatablade / Ansvarsfraskrivelse

De sikkerhedsdatablade (SDS), der er tilgængelige i denne downloadsektion, er kun til generelle informationsformål. På grund af tekniske opdateringer kan vi ikke garantere, at de tilgængelige onlinefiler altid afspejler den nyeste status.

Den eneste juridisk bindende version er det sikkerhedsdatablad, der sendes direkte til dig ved køb eller levering af varerne. Dette dokument indeholder de specifikke sikkerhedsoplysninger, der gælder for dit leverede produkt.

Kontroller venligst alle downloadede filer mod de dokumenter, du har modtaget sammen med din levering, før brug. Vi påtager os intet ansvar for skader, der opstår som følge af brug af forældede onlineversioner, medmindre de er forårsaget med forsæt eller grov uagtsomhed fra vores side.

Hvis du er usikker på, om du har den nyeste version eller har brug for et opdateret dokument, er du velkommen til at kontakte vores kundeservice.

Klüberbeta VR 67-17002

Fordele for din applikation

  • Prolonged service life of cartridges, valves and fittings due to
    • continuous wetting of the friction surfaces
    • compatibility with most standard elastomers and plastics
    • friction and wear reduction in most material combinations
  • Prevents stick-slip and provides balanced damping of operation
    • as temperature has little effect on lubricating film thickness
    • due to high base oil viscosity (effect on actuating forces)
  • Certified for use in drinking water and beverage taps
    • according to UBA (German Environmental Agency) guideline BWGL-KTW, NSF/ANSI/CAN 61, WRAS, ACS, Belgaqua, AS 4020, NSF H1 - further certifications available on request
  • NSF ISO 21469 certified - supports the compliance with the hygienic requirements in your production plant. You will find further information on ISO Standard 21469 on our website www.klueber.com

Kontakt os

We look forward to your inquiry!

For yderligere information om behandlingen af ​​dine data ved brug af kontaktformularen henvises til vores databeskyttelseserklæring.