Shop Søg Kontakt os

Klüber Summit HySyn FG 68

Vare-nr.: 050015 Fully synthetic compressor oils for the food-processing and pharmaceutical industry

Klüber Summit HySyn FG oils are air compressor oils based on synthetic hydrocarbon oils. They can be mixed with mineral oils and other synthetic hydrocarbon oils.

Klüber Summit HySyn FG oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators.

Klüber Summit HySyn FG oils are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüber Summit HySyn FG oils can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Vigtig meddelelse vedrørende sikkerhedsdatablade / Ansvarsfraskrivelse

De sikkerhedsdatablade (SDS), der er tilgængelige i denne downloadsektion, er kun til generelle informationsformål. På grund af tekniske opdateringer kan vi ikke garantere, at de tilgængelige onlinefiler altid afspejler den nyeste status.

Den eneste juridisk bindende version er det sikkerhedsdatablad, der sendes direkte til dig ved køb eller levering af varerne. Dette dokument indeholder de specifikke sikkerhedsoplysninger, der gælder for dit leverede produkt.

Kontroller venligst alle downloadede filer mod de dokumenter, du har modtaget sammen med din levering, før brug. Vi påtager os intet ansvar for skader, der opstår som følge af brug af forældede onlineversioner, medmindre de er forårsaget med forsæt eller grov uagtsomhed fra vores side.

Hvis du er usikker på, om du har den nyeste version eller har brug for et opdateret dokument, er du velkommen til at kontakte vores kundeservice.
Klüber Summit HySyn FG 68

Fordele for din applikation

  • Klüber Summit HySyn FG oils are NSF H1 registered for use in the food-processing and pharmaceutical industry and comply with FDA 21 CFR Sec 178.3570
  • ISO 21469 certified – supports compliance with the hygienic requirements of your production. You will find further information about ISO Standard 21469 on our website www.klueber.com
  • Low maintenance and operating costs due to extended oil change intervals up to 4,000 operating hours in oil-injected screw-type compressors
  • Easy compressor conversion from mineral to the synthetic Klüber Summit HySyn FG oils due to miscibility and compatibility with common seal materials
  • Low tendency to evaporation and thus low impact of the oil vapour on the compressed air
  • Long service of oils filters, activated carbon filters and oil separators
  • Also suitable for the lubrication of gears due to the high scuffing load capacity
  • Used and approved by Aerzener, Air Liquide, Boge, CompAir, Worthington, Getriebebau Nord, Lenze etc.

Kontakt os

We look forward to your inquiry!

For yderligere information om behandlingen af ​​dine data ved brug af kontaktformularen henvises til vores databeskyttelseserklæring.