Shop Search Contact us

Klüberfluid C-F 4 Ultra

Article-No: 039071 Transparent operational lubricant for large open gear drives

Klüberfluid C-F 4 Ultra is a newly developed lubricant especially for the lubrication of medium-size to large girth gear drives. It is based on a mixture of synthetic hydrocarbons and mineral oil.

Klüberfluid C-F 4 Ultra provides good adhesion, resistance to high pressure and wear protection. It is suitable for use at component temperatures up to 110 °C.

No bitumen, heavy metals, chlorine or solvents are contained in the formulation of this lubricant. However, we cannot rule out the possibility that the lubricant contains traces of bitumen, heavy metals, chlorine or solvents. Depending on the application, we recommend consulting with us.

The properties of Klüberfluid C-F 4 Ultra correspond to ANSI/AGMA 9005-E02 table D-1.

Important Notice Regarding Safety Data Sheets / Disclaimer

The Safety Data Sheets (SDS) provided in this download section are for general information purposes only. Due to technical updates, we cannot guarantee that the files available online reflect the most current status at all times.

The only legally binding version is the Safety Data Sheet transmitted directly to you upon purchase or delivery of the goods. This document contains the specific safety information valid for your delivered product.

Please verify any downloaded files against the documents received with your delivery before use. We accept no liability for damages resulting from the use of outdated online versions, unless caused by intent or gross negligence on our part.

If you are unsure whether you have the latest version or require an updated document, please do not hesitate to contact our Customer Service.
Klüberfluid C-F 4 Ultra

Benefits for your application

  • Transparent product – immediate inspection results during operation
  • Fluorescent lubricant film – verifying the presence of a lubricating film
  • Vibration damping – increased component lifetime
  • Temperature decrease – increased component lifetime
  • Permanent fluidity – no accumulation of used grease in the guarding
  • Less used-grease disposal – cost cuts of up to 50 %
  • Lower quantities needed – substantial cost cuts of approx. 20 – 25 % compared to graphite-containing greases

Get in touch

We look forward to your inquiry!

For further information about the processing of your data using the contact form, please refer to our privacy policy.

Chat