Klüberbeta VR 67-17002

Article-No: 022225 Special soft grease for sanitary and heating valves and taps

Klüberbeta VR 67-17002 is a pasty, whitish special grease for valves and fittings. It is based on silicone oils which comply with drinking water regulations. It shows a high dynamic viscosity which is relatively insensitive to temperature.

Klüberbeta VR 67-17002 is a thixotrope product, i.e. it behaves like a consistent lubricant when at rest, while under dynamic load it begins to flow. The product thus combines sufficient wetting of the friction point and hence sound lubrication with a good sealing effect and adhesion.

Klüberbeta VR 67-17002 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberbeta VR 67-17002 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Important Notice Regarding Safety Data Sheets / Disclaimer

The Safety Data Sheets (SDS) provided in this download section are for general information purposes only. Due to technical updates, we cannot guarantee that the files available online reflect the most current status at all times.

The only legally binding version is the Safety Data Sheet transmitted directly to you upon purchase or delivery of the goods. This document contains the specific safety information valid for your delivered product.

Please verify any downloaded files against the documents received with your delivery before use. We accept no liability for damages resulting from the use of outdated online versions, unless caused by intent or gross negligence on our part.

If you are unsure whether you have the latest version or require an updated document, please do not hesitate to contact our Customer Service.

Klüberbeta VR 67-17002

Benefits for your application

  • Prolonged service life of cartridges, valves and fittings due to
    • continuous wetting of the friction surfaces
    • compatibility with most standard elastomers and plastics
    • friction and wear reduction in most material combinations
  • Prevents stick-slip and provides balanced damping of operation
    • as temperature has little effect on lubricating film thickness
    • due to high base oil viscosity (effect on actuating forces)
  • Certified for use in drinking water and beverage taps
    • according to UBA (German Environmental Agency) guideline BWGL-KTW, NSF/ANSI/CAN 61, WRAS, ACS, Belgaqua, AS 4020, NSF H1 - further certifications available on request
  • NSF ISO 21469 certified - supports the compliance with the hygienic requirements in your production plant. You will find further information on ISO Standard 21469 on our website www.klueber.com

Get in touch

We look forward to your inquiry!

For further information about the processing of your data using the contact form, please refer to our privacy policy.

Chat