Shop Search Contact us Newsletter

UNISILKON LCA 3801

Article-No: 022100 Special lubricating grease for drinking water valves and non-metallic material combinations

UNISILKON LCA 3801 is a special lubricating grease neutral in odour and taste and based on silicone oil and a calcium soap. It has been developed primarily for valves and fittings as well as sanitary applications. UNISILKON LCA 3801 provides effective wetting even in narrow lubricating gaps and friction points that are difficult to reach.

Uniform operational smoothness is achieved with cold or hot water as the viscosity is not strongly influenced by changing temperatures, e.g. in single-lever mixers with specific surface pressures up to approx. 4 N/mm², depending on the design of ceramic cartridges.

UNISILKON LCA 3801 is resistant to many media used in the beverage industry and to acid or alkaline disinfectants but not resistant to most organic solvents and strong acids or lyes.

Important Notice Regarding Safety Data Sheets / Disclaimer

The Safety Data Sheets (SDS) provided in this download section are for general information purposes only. Due to technical updates, we cannot guarantee that the files available online reflect the most current status at all times.

The only legally binding version is the Safety Data Sheet transmitted directly to you upon purchase or delivery of the goods. This document contains the specific safety information valid for your delivered product.

Please verify any downloaded files against the documents received with your delivery before use. We accept no liability for damages resulting from the use of outdated online versions, unless caused by intent or gross negligence on our part.

If you are unsure whether you have the latest version or require an updated document, please do not hesitate to contact our Customer Service.
UNISILKON LCA 3801

Benefits for your application

  • For all types of material combinations like ceramics/ceramics, metal/plastic or elastomers
  • With load-bearing areas between 50 and 99.9 %, good wetting behaviour and good adhesion to different material surfaces, the product ensures consistent smooth operation over the entire lifetime of the component
  • Operating torque nearly constant under changing temperatures, enabling constant smooth operation up to an admissible surface pressure of approx. 4 N/mm²
  • Very good resistance to both cold and hot water
  • Good thermal stability even when applied in a thin film ensures a long functional lifetime of ceramic disc cartridges
  • Good sealing effect and backflow from "lubricant depot"
  • Compatible with most ceramics, metals, elastomers and plastics
  • Approved acc. to BWGL-KTW (UBA guideline), NSF/ANSI/CAN 61, ACS (further approvals on request) for use in all friction points exposed to water or in permanent contact with drinking water

Visit our Onlineshop

Our products are now even closer to you.

Shop

Get in touch

We look forward to receiving your message!

For further information about the processing of your data using the contact form, please refer to our privacy policy.