When joining or assembling rubber-elastic materials, it is particularly important that the components can be fitted perfectly without excessive force. Ill-fitting or damaged surfaces are frequently the result of less than optimal assembly lubrication, e.g. by mineral-oil-based products, soap solutions, water or silicones. In the application, this may become apparent in the form of corrosion, poor compatibility, impaired wetting of elastomers or residues.
As products matching precisely these applications we developed Klüberplus S 07-100, -100 M2, and -100 M4. During assembly, these products generate a temporary lubricating effect that makes the components fit into each other smoothly. As assembly forces are evidently up to 75 % lower, the amount of reject can be reduced and the production rate increased. As the water evaporates, the product ceases to act as a lubricant, so the component is fixed firmly in place. Klüberplus S 07-100, -100 M2 and -100 M4 offer you a wide variety of uses as they are neutral towards most customary materials. No matter if in wet or dry condition, the water-based product does not encourage corrosion.
The Klüberplus S 07 series is available in three ready-to-use viscosity variants. Owing to the gel-like texture of Klüberplus S 07-100, this product adheres well to the assembled component, so overhead application is easily possible with the workplace remaining clean. Klüberplus S 07-100 M2 and 100 M4 are ready-to-use emulsions with a lower viscosity. They are therefore preferably used for immersion or spray application, or generally in applications where a lower viscosity is required.
