Klüberbio RM 8-100

Article-No: 009072 Eco-compatible, synthetic stern tube oil

Klüberbio RM 8-100 is a synthetic, ultimately biodegradable stern tube oil with excellent ageing and oxidation stability. The oil is also highly resistant to contact with water.

Klüberbio RM 8-100 shows very high shear stability and forms a strong, hydrodynamic oil film also under high loads.

As the lubricant is ultimately biodegradable and a very good compatibility with FKM-based propeller shaft seals reduces the risk of oil loss or leakage and therefore environmental impact. The product complies also with the U.S. Environmental Protection Agency's requirements for classification as an Environmentally Acceptable Lubricant (EAL) in terms of biodegradability, toxicity and bioaccumulation standards according to Appendix A of the EPA's Vessel General Permit (VGP).

Important Notice Regarding Safety Data Sheets / Disclaimer

The Safety Data Sheets (SDS) provided in this download section are for general information purposes only. Due to technical updates, we cannot guarantee that the files available online reflect the most current status at all times.

The only legally binding version is the Safety Data Sheet transmitted directly to you upon purchase or delivery of the goods. This document contains the specific safety information valid for your delivered product.

Please verify any downloaded files against the documents received with your delivery before use. We accept no liability for damages resulting from the use of outdated online versions, unless caused by intent or gross negligence on our part.

If you are unsure whether you have the latest version or require an updated document, please do not hesitate to contact our Customer Service.

Klüberbio RM 8-100

Benefits for your application

  • Complies with the requirements for Environmentally Acceptable Lubricants as defined in Appendix A of the EPA 2013 VGP (Vessel General Permit)
  • Ultimately biodegradable and non-toxic to marine organisms, reducing harm to the environment in the event of leakage
  • FKM elastomers used by leading propeller shaft seal manufacturers are resistant to Klüberbio RM 8-100 and have been approved accordingly. This helps prevent leakages and contamination
  • High operational reliability due to the formation of a strong, hydrodynamic oil film
  • service life extention resulting in long oil drain intervals due to high resistance to contact with water

Visit our Onlineshop

Our products are now even closer to you.

Get in touch

We look forward to receiving your message!

For further information about the processing of your data using the contact form, please refer to our privacy policy.