Shop Pretraga Kontakt

PRESSPATE SEM 95/800 T

Br. artikla: 043050 High-performance lubricants for cold forming of sheets and tubes

In your metal forming operations, the challenge is to find a reliable lubricant that protects tools against wear. Upon completion of the forming process, the lubricant should be easily removed.

In this respect, PRESSPATE SEM 95/800 T and PRESSPATE TB can offer optimal support. Both products offer excellent lubrication performance especially when used for the cold forming of thick or thin metal sheets or tubes. This ensures easier process start-up even under difficult ambient conditions leading to a reduction of reject rates.

Due to the very good lubricating performance, PRESSPATE SEM 95/800 T and PRESSPATE TB pastes can be applied in small quantities. Consequently, components are easy to clean using aqueous systems.

PRESSPATE SEM 95/800 T has been tried and tested with numerous applications. For more taxing bending processes requiring higher performance, PRESSPATE TB should be given preference.

Važno obaveštenje u vezi sa bezbednosnim listovima / Odricanje od odgovornosti

Bezbednosni listovi (SDS) dostupni u ovoj sekciji za preuzimanje namenjeni su isključivo za opšte informativne svrhe. Zbog tehničkih ažuriranja ne možemo garantovati da datoteke dostupne na internetu uvek odražavaju najnovije stanje.

Jedina pravno obavezujuća verzija je bezbednosni list koji vam se dostavlja direktno prilikom kupovine ili isporuke robe. Ovaj dokument sadrži specifične informacije o bezbednosti koje važe za isporučeni proizvod.

Molimo vas da pre upotrebe proverite sve preuzete datoteke u odnosu na dokumente koje ste dobili uz isporuku. Ne snosimo odgovornost za štetu nastalu korišćenjem zastarelih online verzija, osim ako je prouzrokovana namerno ili grubom nepažnjom s naše strane.

Ako niste sigurni da li imate najnoviju verziju ili vam je potreban ažurirani dokument, slobodno kontaktirajte našu službu za korisnike na customerservice.at@klueber.com
PRESSPATE SEM 95/800 T

Prednosti za vašu primenu

  • Reduction of friction and wear, especially in deep-drawing and bending operations involving high degrees of deformation
  • Improving process stability for a lower reject rate
  • Increasing tool life; reduction of tooling costs and set-up times compared with conventional, fluid metal forming oils
  • Workpieces can be cleaned using conventional cleaning agents and processes

Obratite nam se

Radujemo se vašem upitu!

Ostale informacije o obradi vaših podataka pomoću formulara za kontakt uzmite iz naše Izjave o zaštiti podataka.