UNISILKON LCA 3801 // Klüber Lubrication

UNISILKON LCA 3801 is a special lubricating grease neutral in odour and taste and based on silicone oil and a calcium soap. It has been developed primarily for valves and fittings as well as sanitary applications. UNISILKON LCA 3801 provides effective wetting even in narrow lubricating gaps and friction points that are difficult to reach.

Uniform operational smoothness is achieved with cold or hot water as the viscosity is not strongly influenced by changing temperatures, e.g. in single-lever mixers with specific surface pressures up to approx. 4 N/mm², depending on the design of ceramic cartridges.

UNISILKON LCA 3801 is resistant to many media used in the beverage industry and to acid or alkaline disinfectants but not resistant to most organic solvents and strong acids or lyes.

Benefits for your application

For all types of material combinations like ceramics/ceramics, metal/plastic or elastomers
With load-bearing areas between 50 and 99.9 %, good wetting behaviour and good adhesion to different material surfaces, the product ensures consistent smooth operation over the entire lifetime of the component
Operating torque nearly constant under changing temperatures, enabling constant smooth operation up to an admissible surface pressure of approx. 4 N/mm²
Very good resistance to both cold and hot water
Good thermal stability even when applied in a thin film ensures a long functional lifetime of ceramic disc cartridges
Good sealing effect and backflow from "lubricant depot"
Compatible with most ceramics, metals, elastomers and plastics
Approved acc. to BWGL-KTW (UBA guideline), NSF/ANSI/CAN 61, ACS (further approvals on request) for use in all friction points exposed to water or in permanent contact with drinking water

UNISILKON LCA 3801

Product information

Safety data sheet

Benefits for your application

Visit our Onlineshop

Get in touch