Klüber Summit HySyn FG 32

Obj. č.: 050013 Fully synthetic compressor oils for the food-processing and pharmaceutical industry

Klüber Summit HySyn FG oils are air compressor oils based on synthetic hydrocarbon oils. They can be mixed with mineral oils and other synthetic hydrocarbon oils.

Klüber Summit HySyn FG oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators.

Klüber Summit HySyn FG oils are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüber Summit HySyn FG oils can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Dôležité upozornenie týkajúce sa bezpečnostných listov / Vyhlásenie o vylúčení zodpovednosti

Bezpečnostné listy (SDS) uvedené v tejto sekcii na stiahnutie slúžia iba na všeobecné informačné účely. Vzhľadom na technické aktualizácie nemôžeme zaručiť, že súbory dostupné online vždy reflektujú najaktuálnejší stav.

Jediná právne záväzná verzia je bezpečnostný list, ktorý Vám bude priamo doručený pri nákupe alebo dodaní tovaru. Tento dokument obsahuje konkrétne bezpečnostné informácie platné pre Váš dodaný produkt.

Pred použitím prosím skontrolujte všetky stiahnuté súbory v porovnaní s dokumentmi, ktoré ste dostali spolu s dodávkou. Neprijímame žiadnu zodpovednosť za škody spôsobené používaním neaktuálnych online verzií, pokiaľ neboli spôsobené úmyselne alebo hrubou nedbanlivosťou z našej strany.

Ak si nie ste istí, či máte najnovšiu verziu alebo potrebujete aktualizovaný dokument, neváhajte kontaktovať náš zákaznícky servis na cs@sk.klueber.com alebo +421 37 783 4003.

Klüber Summit HySyn FG 32

Výhody pre váš prevádzku

  • Klüber Summit HySyn FG oils are NSF H1 registered for use in the food-processing and pharmaceutical industry and comply with FDA 21 CFR Sec 178.3570
  • ISO 21469 certified – supports compliance with the hygienic requirements of your production. You will find further information about ISO Standard 21469 on our website www.klueber.com
  • Low maintenance and operating costs due to extended oil change intervals up to 4,000 operating hours in oil-injected screw-type compressors
  • Easy compressor conversion from mineral to the synthetic Klüber Summit HySyn FG oils due to miscibility and compatibility with common seal materials
  • Low tendency to evaporation and thus low impact of the oil vapour on the compressed air
  • Long service of oils filters, activated carbon filters and oil separators
  • Also suitable for the lubrication of gears due to the high scuffing load capacity
  • Used and approved by Aerzener, Air Liquide, Boge, CompAir, Worthington, Getriebebau Nord, Lenze etc.

Buďte v kontakte

Radi pomôžeme firemným zákazníkom, obchodným partnerom a profesionálnym používateľom s akýmikoľvek otázkami týkajúcimi sa spoločnosti Klüber Lubrication.
Tešíme sa na váš dopyt!