Klüberbeta VR 67-17002

Št. izdelka: 022225 Special soft grease for sanitary and heating valves and taps

Klüberbeta VR 67-17002 is a pasty, whitish special grease for valves and fittings. It is based on silicone oils which comply with drinking water regulations. It shows a high dynamic viscosity which is relatively insensitive to temperature.

Klüberbeta VR 67-17002 is a thixotrope product, i.e. it behaves like a consistent lubricant when at rest, while under dynamic load it begins to flow. The product thus combines sufficient wetting of the friction point and hence sound lubrication with a good sealing effect and adhesion.

Klüberbeta VR 67-17002 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberbeta VR 67-17002 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Pomembno obvestilo glede varnostnih listov / Izjava o omejitvi odgovornosti

Varnostni listi (SDS), ki so na voljo v tem razdelku za prenos, so namenjeni izključno splošnim informacijam. Zaradi tehničnih posodobitev ne moremo zagotoviti, da datoteke, ki so na voljo na spletu, vedno odražajo najnovejše stanje.

Edina pravno zavezujoča različica je varnostni list, ki vam je neposredno posredovan ob nakupu ali dostavi blaga. Ta dokument vsebuje posebne varnostne informacije, ki veljajo za vaš dostavljeni izdelek.

Pred uporabo preverite vse prenesene datoteke v primerjavi z dokumenti, ki ste jih prejeli ob dostavi. Ne prevzemamo odgovornosti za škodo, ki nastane zaradi uporabe zastarelih spletnih različic, razen če je povzročena namerno ali zaradi hude malomarnosti z naše strani.

Če niste prepričani, ali imate najnovejšo različico ali potrebujete posodobljen dokument, se obrnite na našo službo za pomoč strankam na customerservice@at.klueber.com

Klüberbeta VR 67-17002

Prednosti za vašo uporabo

  • Prolonged service life of cartridges, valves and fittings due to
    • continuous wetting of the friction surfaces
    • compatibility with most standard elastomers and plastics
    • friction and wear reduction in most material combinations
  • Prevents stick-slip and provides balanced damping of operation
    • as temperature has little effect on lubricating film thickness
    • due to high base oil viscosity (effect on actuating forces)
  • Certified for use in drinking water and beverage taps
    • according to UBA (German Environmental Agency) guideline BWGL-KTW, NSF/ANSI/CAN 61, WRAS, ACS, Belgaqua, AS 4020, NSF H1 - further certifications available on request
  • NSF ISO 21469 certified - supports the compliance with the hygienic requirements in your production plant. You will find further information on ISO Standard 21469 on our website www.klueber.com

Stopite v stik z nami

Veseli bomo vašega povpraševanja!

Za več informacij o obdelavi vaših osebnih podatkov iz obrazca za stik glejte našo izjavo o varstvu podatkov.