Application area | Product | Benefits |
---|---|---|
Weaving machine gears | Klübersynth 100 KV Klübersynth 80 KV Klübersynth 50 KV Klübersynth G 4-130 |
Synthetic gear oils especially for weaving machines |
Depending on the operating conditions, oil change intervals can be extended to approx. 5,000 to 20,000 operating hours compared to mineral-oil based gear oils due to their good ageing resistance |
||
Reduced maintenance costs and higher output due to longer oil change intervals | ||
Gear of the jacquard machine | Klübersynth G 4-150 | Good wetting of the friction point The uniform lubricating film is not affected by demanding operating conditions, e.g. vibrations |
Compatible with plastics and elastomers | ||
Low copper corrosion | ||
Tried-and-tested material compatibility to protect the sensitive machine components for a long time | ||
Gripper looms | MICROLUBE GBU Y 131 | Allows extension of relubrication intervals to one month, even at extremely high speeds |
Shows a very good backflow behaviour, which is especially important in friction points subject to oscillating motion | ||
Longer service life of the bearings in the flywheel support and the crosshead axle, also when subjected to strong vibrations | ||
Increased output and reduced maintenance | ||
STABURAGS NBU 12 ALTEMP | Reliable protection against tribo-corrosion | |
Motor coupling with brake and sliding block | ISOFLEX TOPAS NB 52 ISOFLEX ALLTIME SL 2 |
Improves smooth operation of friction points for a long time |
Rapier guide roller | Reduced maintenance | |
Distributor cutter | ||
Open gears | Very good wear protection and adhesion ensure extremely long relubrication intervals | |
Easy application by spray | ||
Minimum-quantity lubrication possible, long relubrication intervals and hence reduced maintenance | ||
Chains | HOTEMP 2000 Spray | Universal spray for chains – also for high-speed transmission, control and conveyor chains |
Good adhesion and wear protection | ||
Easy application by spray |
Asst. Manager - Business Support
18001237686