Machine | Component | Lubricant | Benefits | Product story |
---|---|---|---|---|
Blow Moulding | Central Lubrication system |
-Increased component availability and extended maintenance intervals -Reduces friction and wear, e.g. in rolling bearings, owing to its good wear protection properties and good flow characteristics. -ISO 21469 certified- supports the compliance with hygienic requirements in your production plant. |
||
Mould support unit locking system |
-Higher wear protection -Better cold start with the same nominal viscosity (ISO VG) -May not require oil coolers due to reduced temperatures -Reduced friction leads to lower energy costs |
|||
Stretching guides |
-Good corrosion protection reduces the risk of premature bearing failure -Good pumpability in centralized grease system prevents grease starvation -For a wide service temperature range due to the soft consistency of the grease -ISO 21469 certified – supports the compliance with the hygienic requirements in your production. |
|||
Oven wheel shaft bearings |
-Reliable operation at low temperatures due to soft consistency and low base oil viscosity -Reduced risk of premature component failure due to good adhesion and anticorrosive behaviour -Lubricant starvation prevented by very good pumpability in centralised lubricating systems -NSF-H1 registration for higher process reliability |
|||
Enclosed gearbox | Klüberoil 4 UH1 N series |
-Higher wear protection -Better cold start with the same nominal viscosity (ISO VG) -May not require oil coolers due to reduced temperatures -Reduced friction leads to lower energy costs |
||
|
Lifting rods and guides in filler machine |
-Based on medically pure oils -NSF H1 registered supporting process reliability |
||
Open drives in filler machine |
-Reduced maintenance needs -Low contamination of the machine environment due to the use of white solid lubricants and low lubricant consumption
-Product streamlining possible as the product is suitable for gear rim/pinion drives and bearings -Improved component performance -Less wear due to selected solid lubricants and additives -Very good corrosion protection also when exposed to saltwater |
|||
Centralized grease system in filler machine |
-Increased component availability and extended maintenance intervals -Owing to its good load-carrying capacity -Due to good corrosion protection -Reduces friction and wear, e.g. in rolling bearings, owing to its good wear protection properties and good flow characteristics. |
|||
Enclosed gearbox |
-Higher wear protection -Reduced friction leads to lower energy costs |
|||
Capping head sliding surfaces |
|
-Neutral in taste and odour -NSF H1 and NSF 3H registered supporting process reliability |
||
|
Central Lubrication system | Klüberfood NH1 94-402 |
-Increased component availability and extended maintenance intervals -Owing to its good load-carrying capacity -Due to good corrosion protection -Reduces friction and wear, e.g. in rolling bearings, owing to its good wear protection properties and good flow characteristics. |
|
|
-Higher machine availability and less need for maintenance at very high operating temperatures up to 260 °C under the influence of aggressive media and vapours when used with plastics and sealing materials -Reliable operation in numerous industries and component types thanks to BARRIERTA base oils, which are made specifically to enable long-term stability backed by a large number of approvals and references for various applications four consistency classes to suit different applications |
|||
Enclosed gearbox |
Klüberoil 4 UH1 N series |
-Higher wear protection -Better cold start with the same nominal viscosity (ISO VG)
-Reduced friction leads to lower energy costs |
||
Shrink Wrapper |
Transport and drive chains in the tunnel |
-Low oil evaporation rate resulting in low residue formation and reduced oil consumption | ||
Palletiser | Central Lubrication system |
-Excellent load-carrying capacity -Very good corrosion protection and water resistance -Applicable through centralised lubrication system for rolling bearings subject to high loads -Excellent flow properties to ensure the lubrication point is reliably supplied with lubricant; extended component life |
||
Bottle conveyor | Conveyor bearings | Klüberlub NH1 11-222 |
-Lubricant rationalisation possible due to the product’s multiple uses -Good water resistance providing increased levels of surface protection when compared to a standard lithium EP 2 grease -NSF H1 registered supporting process reliability -ISO 21469 certified – supports the compliance with the hygienic requirements in your production. |
|
Gearboxes |
Klübersynth UH 1 6 series / Klübersynth GH 6-680 |
-Higher component availability and longer maintenance intervals |
||
Refrigeration compressors |
Compressor |
Klüber Summit RHT 68 |
-Low solubility in ammonia -Excellent flow characteristics at low temperatures Lower maintenance costs due to long oil change intervals and reduced oil consumption -Lower operating costs due to long filter and oil separator lifetimes -Lower oil carryover than with naphthene-based mineral oils |
Increasing refrigeration efficiency with the right lubricant |
Homogeniser | Crankcase | Klüberoil 4 UH1 N series | - Higher wear protection - Better cold start with the same nominal viscosity (ISO VG) - May not require oil coolers due to reduced temperatures - Reduced friction leads to lower energy costs |
|
Gearbox | Klüberoil 4 UH1 N series | - Higher wear protection - Better cold start with the same nominal viscosity (ISO VG) - May not require oil coolers due to reduced temperatures - Reduced friction leads to lower energy costs |
||
Hydraulic system | Klüberfood 4 NH1-68 | - Fully synthetic base oil to support extended oil change intervals and reduced operating cost in hydraulic systems - Reduced contaminant build-up and valve blockages compared to mineral hydraulic oils as a result of the improved oil stability - NSF H1 registered supporting process reliability |
Component | Lubricant | Benefit | |
---|---|---|---|
Maintenance products | Hydraulic systems | Klüberfood 4 NH1 series | - Fully synthetic base oil to support extended oil change intervals and reduced operating cost in hydraulic systems - Reduced contaminant build up and valve blockages compared to mineral hydraulic oils as a result of the improved oil stability - NSF H1 registered supporting process reliability |
Water displacement fluid | Klüberfood NH1 4 002 Spray | - Good penetrating properties and water displacement - NSF H1 registered supporting process reliability |
|
Automatic lubricant dispenser | Klüberlub NH1 11 222 in STAR VARIO | - Lubricant rationalisation possible due to the product’s multiple uses - Good water resistance providing increased levels of surface protection when compared to a standard lithium EP 2 grease - NSF H1 registered supporting process reliability |
|
Non-dripping chain lubricant | Klüberoil 4 UH1 1500 N | - Registered as NSF H1 - High scuffing protection - Good wear protection for gears and rolling bearings |
Asst. Manager - Business Support
18001237686