Speciality lubricants for the dairy industry

-A reduction in your lubricant inventory with one lubricant which can be considered for both seals and rolling bearings
-Good compatibility when coming in contact with EPDM seals or even beer foam enhancing seal life and reduction in downtime
-High resistance to many types of media such as disinfectants, cleaning agents, water, steam ensuring maximum protection of both seals and bearings, enhancing life and operating cost reduction
-NSF H1 registered supporting process reliability
-Certified for use in drinking water valves acc. to the NSF Standard 61 and WRAS (Great Britain)
-NSF ISO 21469 certified - supports compliance with the hygienic requirements in your production plant. 

Joints

Klübersynth UH1 14-31

Klübersynth UH1 14-222

Homogeniser

Crankcase

Klüberoil 4 UH1 N series

-Higher wear protection
-Better cold start with the same nominal viscosity (ISO VG)
-May not require oil coolers due to reduced temperatures
-Reduced friction leads to lower energy costs

Gearbox

Klüberoil 4 UH1 N series

-Higher wear protection
-Better cold start with the same nominal viscosity (ISO VG)
-May not require oil coolers due to reduced temperatures
-Reduced friction leads to lower energy costs

Hydraulic system

Klüberfood 4 NH1-68

-Fully synthetic base oil to support extended oil change intervals and reduced operating cost in hydraulic systems
-Reduced contaminant build-up and valve blockages compared to mineral hydraulic oils as a result of the improved oil stability
-NSF H1 registered supporting process reliability

Ammonia Refrigeration compressor

Compressor

Klüber Summit RHT 68

-Low solubility in ammonia
-Excellent flow characteristics at low temperatures
-Lower maintenance costs due to long oil change intervals and reduced oil consumption
-Easier changeover due to neutral behaviour towards seals
-High refrigeration efficiency due to reduced oil deposits
-Lower operating costs due to long filter and oil separator lifetimes
-Lower oil carryover than with naphthene-based mineral oils

Increasing refrigeration efficiency with the right lubricant

Continuous Butter making Machine

Bearings

Klübersynth UH1 14-222

-Facilitates product streamlining owing to its wide range of applications
-Offers improved surface protection through good adhesion and its particular consistency
-ISO 21469 certified – supports the compliance with the hygienic requirements in your production. 

Gearboxes

Klüberoil 4 UH1 N series

-Higher wear protection
-Better cold start with the same nominal viscosity (ISO VG)
-May not require oil coolers due to reduced temperatures
-Reduced friction leads to lower energy costs

Hydraulic system

Klüberfood 4 NH1 series

-Fully synthetic base oil to support extended oil change intervals and reduced operating cost in hydraulic systems
-Reduced contaminant build-up and valve blockages compared to mineral hydraulic oils as a result of the improved oil stability
-NSF H1 registered supporting process reliability

Atomizer in powder plant

Hydraulic system

Klüberfood 4 NH1 series

-Fully synthetic base oil to support extended oil change intervals and reduced operating cost in hydraulic systems
-Reduced contaminant build-up and valve blockages compared to mineral hydraulic oils as a result of the improved oil stability
-NSF H1 registered supporting process reliability

Continuous Freezer in Ice Cream factory

Bearings

Klübersynth UH1 14-31

-The reliableReliable operation also at low temperatures due to soft consistency and low base oil viscosity
-Reduced risk of premature component failure due to good adhesion and anticorrosive behaviour
-Lubricant starvation prevented by very good pumpability in centralised lubricating systems
-NSF-H1 registration for higher process reliability

Chains

Klüber Summit HySyn FG 32

-Klüber Summit HySyn FG oils are NSF H1 registered for use in the food-processing and pharmaceutical industry and comply with FDA 21 CFR Sec 178.3570
-ISO 21469 certified – supports compliance with the hygienic requirements of your production.
-Low maintenance and operating costs due to extended oil change intervals up to 4,000 operating hours in oil-injected screw-type compressors
-Easy compressor conversion from mineral to the synthetic Klüber Summit HySyn FG oils due to miscibility and compatibility with common seal materials
-Low tendency to evaporation and thus low impact of the oil vapour on the compressed air
-Long service of oils filters, activated carbon filters and oil separators
-Also suitable for the lubrication of gears due to the high scuffing load capacity
-Used and approved by Aerzener, Air Liquide, Boge, CompAir, Worthington, Getriebebau Nord, Lenze etc.

Gears

Klüberoil 4 UH1-32 N

-Registered as NSF H1 and certified according to ISO 21469
-High scuffing protection
-Good wear protection for gears and rolling bearings
-Good shear stability for reliable lubricant film formation
-Excellent ageing and oxidation resistance
-Wide service temperature range due to good viscosity-temperature behaviour
-Low foaming tendency
-Energy savings due to optimised friction behaviour
-Good elastomer compatibility
-Approved by numerous gear OEMs

Conveyer Belt lubrication

Chains

Klüberfood NH1 C 4-58

-Pumpable through central lubrication systems => reduction of operating costs
-Consistent manufacture of goods due to precise lubricant metering avoiding contamination
-Minimal lubrication: clear reduction of bacteriological contamination and corrosion, safer work environment (dry floors), reduction of wastewater