Klüberbio LG 39-701 N

Article-No: 009050 Eco-compatible operating lubricant for open gear drives

Are you a manufacturer or operator of open gear drives, jack-up lifting systems or other on-board equipment that is frequently in contact with sea water? In that case you are likely to be interested in obtaining an eco-friendly, high-performance operating lubricant.

Our Klüberbio LG 39-701 N is a high-performance grease with a new type of base oil and additive package. It combines very good eco-friendliness with high load-carrying capacity, good antiwear and anticorrosive effect and excellent adhesion to surfaces.

The high-viscosity base oil of Klüberbio LG 39-701 N comes from 100 % renewable resources.

Klüberbio LG 39-701 N complies with the 2013 Vessel General Permit requirements of the Environmental Protection Agency (EPA) in terms of biodegradability, minimal toxicity and bio-accumulation to be met by Environmentally Acceptable Lubricants.

Due to the lubricant's excellent low-temperature behaviour, it can be pumped in centralised lubricating systems down to -30 °C and sprayed even below 0 °C. These positive product characteristics enable you to use the lubricant over a wider temperature range than is common with mineral-oil-based greases of the same base oil viscosity.

Klüberbio LG 39-701 N enables a further reduction of more than 50 % in lubricant consumption in jack-up lifting systems if spray application is used. This will further reduce your operating costs and is beneficial to the environment.

Klüberbio LG 39-701 N

Benefits for your application

  • Complies with the requirements for Environmentally Acceptable Lubricants as defined in Appendix A of the EPA 2013 GP (Vessel General Permit)

  • Lower environmental impact in the event of leakage. The base oil consists of renewable raw materials and is ultimately biodegradable

  • Good low-temperature behaviour enables operation of open gear drives in cold conditions

  • Selected additives ensure longer component life and reduced wear

  • Cost reduction due to low consumption when applied by selected spraying systems

  • Meets requirements for OSPAR conformance, registered in Denmark, Norway, Netherlands and Great Britain

Get in touch

We look forward to receive your message!

For further information about the processing of your data using the contact form, please refer to our privacy policy.