UNISILKON L 250 L

Artikelnummer: 022102 Special lubricating grease for drinking water, beverage and heating valves and fittings

UNISILKON L 250 L is a special lubricant based on silicone oil and PTFE with high thermal stability. UNISILKON L 250 L offers good penetration ability in small lubrication gaps and lube points of difficult access. Owing to its relatively high viscosity, adhesion is improved even in case of unfavourable geometries. UNISILKON L 250 L is resistant to cold and hot water, superheated steam up to approx. 130 °C as well as industrial cleaning agents and disinfectants. UNISILKON L 20 L is also resistant to pumpable foodstuffs and beverages like fruit juices, beer or milk products. UNISILKON L 250 L is not resistant to organic solvents or strong acid and alkaline solutions.

UNISILKON L 250 L is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of UNISILKON L 250 L can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

UNISILKON L 250 L

Fördelar för din applikation

  • Proven effective in valves and fittings as well as adjusting mechanisms in the drinking water, beverage, sanitary and heating sectors

  • Certified acc. to international standards for valves and fittings, e.g. KTW-BWGL, WRAS, ACS, AS 4020, NSF Standard 61 and NSF H1

  • Long-term protection of seals and bearings owing to the lubricant’s good resistance to numerous media like disinfectants, cleaning agents, water, steam

Kontakta oss

Du kan nå oss via kontaktformuläret, ringa oss (+46 8 590 986 00) eller skicka ett mejl direkt till vår kundtjänst (klueber.se@klueber.com). Vi ser fram emot ditt meddelande!

För mer information om behandlingen av dina uppgifter via kontaktformuläret, se vår dataskyddsdeklaration.