Klüber Summit FG 100

Artikkel-nummer: 050008 Fully synthetic compressor oils for the food-processing and pharmaceutical industries

Klüber Summit FG oils are special compressor oils developed for the food-processing and pharmaceutical industries. They are fully synthetic and can be mixed with mineral oil as well as other synthetic hydrocarbon oils.

Klüber Summit FG oils offer very good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators.

Klüber Summit FG oils are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüber Summit FG oils can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Viktig melding om sikkerhetsdatablader / Ansvarsfraskrivelse

Sikkerhetsdatabladene (SDS) som er tilgjengelige i denne nedlastingsseksjonen, er kun ment for generell informasjon. På grunn av tekniske oppdateringer kan vi ikke garantere at filene som er tilgjengelige online, alltid gjenspeiler den nyeste statusen.

Den eneste juridisk bindende versjonen er sikkerhetsdatabladet som sendes direkte til deg ved kjøp eller levering av varene. Dette dokumentet inneholder den spesifikke sikkerhetsinformasjonen som gjelder for ditt leverte produkt.

Vennligst kontroller alle nedlastede filer mot dokumentene du mottok med leveransen før bruk. Vi påtar oss intet ansvar for skader som oppstår ved bruk av utdaterte onlineversjoner, med mindre de er forårsaket med hensikt eller grov uaktsomhet fra vår side.

Hvis du er usikker på om du har den nyeste versjonen eller trenger et oppdatert dokument, ikke nøl med å kontakte vår kundeservice.

Klüber Summit FG 100

Fordeler for din applikasjon

  • Klüber Summit FG oils are NSF H1 registered for use in the food-processing and pharmaceutical industries and comply with FDA 21 CFR Sec 178.3570
  • ISO 21469 certified – supports compliance with the hygienic requirements of your production. You will find further information about ISO Standard 21469 on our website www.klueber.com
  • Low maintenance and operating costs due to extended oil change intervals up to 5,000 operating hours in oil-injected screw-type compressors *
  • Easy compressor conversion from mineral to the synthetic Klüber Summit FG oils due to miscibility and compatibility with common seal materials **
  • Low tendency to evaporation and thus low impact of the oil vapour on the compressed air
  • Longer service of oils filters, activated carbon filters and oil separators
  • Excellent demulsifying behaviour and hence good water separation ability
  • Surpasses the requirements of DIN 51506-VDL and ISO 6743-3 L-DAJ (VG 32/46/68) / L-DAB (VG 100/150)

Ta kontakt

Vi ser frem til din henvendelse!

For videre informasjon om behandling av dine data via kontaktskjemaet, vennligst vis til databeskyttelseerklæringen.