Shop Search Contact us

PARALIQ GTE 703

Article-No: 022148 Synthetic lubricating grease for valves fittings with EPDM seals

PARALIQ GTE 703 is a special lubricating grease based on silicone oil and PTFE.

The product is registered as NSF H1 and complies with FDA 21 CFR § 178.3570. It was especially developed for the incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries, thus contributing to the reliability of your production processes. Nevertheless, we recommend to conduct an additional risk analysis, e.g. HACCP.

Besides for seals, PARALIQ GTE 703 may also be used for very low-load rolling bearings used in the beverage industry where an EPDM-compatible H1 lubricant is required. Very low load applications with a C/P ratio of 30 and slow speeds.

PARALIQ GTE 703 is resistant to hot and cold water, disinfectants, cleaning agents and steam.

When applied properly, it does not impair the formation of froth or the taste of beer.

Doemens Academy GmbH in Gräfelfing, Germany, confirmed that PARALIQ GTE 703 meets all requirements for a sealing grease in dispensing units.

Important Notice Regarding Safety Data Sheets / Disclaimer

The Safety Data Sheets (SDS) provided in this download section are for general information purposes only. Due to technical updates, we cannot guarantee that the files available online reflect the most current status at all times.

The only legally binding version is the Safety Data Sheet transmitted directly to you upon purchase or delivery of the goods. This document contains the specific safety information valid for your delivered product.

Please verify any downloaded files against the documents received with your delivery before use. We accept no liability for damages resulting from the use of outdated online versions, unless caused by intent or gross negligence on our part.

If you are unsure whether you have the latest version or require an updated document, please do not hesitate to contact our Customer Service.
PARALIQ GTE 703

Benefits for your application

  • A reduction in your lubricant inventory with one lubricant which can be considered for both seals and rolling bearings

  • Good compatibility when coming in contact with EPDM seals or even beer foam enhancing seal life and reduction in down time

  • High resistance to many types of media such as disinfectants, cleaning agents, water, steam ensuring maximum protection of both seals and bearings, enhancing life and operating cost reduction

  • NSF H1 registered supporting process reliability

  • NSF ISO 21469 certified - supports compliance with the hygienic requirements in your production plant. You will find further information on ISO standard 21469 on our website www.klueber.com

Get in touch

We look forward to your inquiry!

For further information about the processing of your data using the contact form, please refer to our privacy policy.

Chat