| Application | Product | Benefits |
|---|---|---|
| Rolling bearings in washing and mercerising machines, dyeing machines and festoon steamers | STABURAGS NBU 12 STABURAGS NBU 12 / 300 KP |
Special greases resistant to water and steam |
| Also resistant to aqueous alkaline and acid solutions | ||
| High operational safety | ||
| Considerably reduced maintenance | ||
| Klüberplex BE 31-222 Klüberplex BE 31-502 |
Very good corrosion protection of bearings due to the good sealing effect | |
| Corrosion protection for the inner lining of steamers | STABURAGS NBU 30 | Special grease resistant to hot water, steam, alkaline and acid solutions; protects the inner lining of steamers |
| Klüberplex BE 31-502 | Economical long-term protection | |
| Internal coating lasts for one year or more, in most cases: no premature, expensive replacement of the steamer lining | ||
| Chains in steamers | Klübersynth CTH 2-260 | Klübersynth CTH 2-260 Supreme offers particularly high thermal stability All these products are high-temperature chain oils for temperatures up to 250 °C |
| PRIMIUM FLUID SPECIAL | Good wetting properties Low formation of residues Good regenerating effect of the chain oil during relubrication |
|
| HOTEMP 2000 Spray | Smooth operation and reduced repair costs | |
| Bearings in steamers | BARRIERTA L 55/2 | Fully synthetic, long-term and high-temperature bearing grease |
| Klübertemp GR AR 555 | Excellent resistance to aggressive chemicals and steam | |
| Smooth operation and reduced repair costs | ||
| Gaskets in dyeing equipment and yarn steamers | SYNTHESO PROBA 270 | Fully synthetic lubricating grease, compatible with natural and synthetic rubber |
| Prevents sticking of the seal, therefore the lids open and close more easily and the service life of seals is considerably extended | ||
| In most cases, seal lubrication is required once a week only | ||
| Reduced spare parts costs | ||
| Bearings of washing liquor circulation pump | STABURAGS NBU 12/300 KP | Very media-resistant bearing grease which is not washed out in case of seal leakage |
| PETAMO GHY 133 N Klübersynth HB 74-401 |
High operational safety | |
| Longer bearing life and reduced maintenance | ||
| Rolling and plain bearings in heated calenders | Klübersynth GH 6 series | Fully synthetic high-temperature oils with good viscosity-temperature behaviour |
| Can be delivered through oil pumps and pipe systems, also at room temperature | ||
| At high temperatures up to 150 °C or short peaks up to 180 °C (maximum film temperature 225 °C), Klübersynth GH 6 oils have a higher operational viscosity than mineral oils of the same ISO VG viscosity grade and fulfil the demands for the required full fluid-film lubrication | ||
| Longer oil change intervals: reduced maintenance costs and downtime | ||
| Steam headers/rotary couplings in e.g. steam-heated finishing machines | PETAMO GY 193 | For temperatures up to 180 °C Reduced maintenance costs and downtime due to the good thermal stability, sealing effect and resistance to media |
| BARRIERTA L 55/2 | For temperatures up to 260 °C Reduced maintenance costs and downtime due to the good thermal stability, sealing effect and resistance to media |
|
| Klübertemp GR AR 555 Klübertemp HM 83-402 |
For temperatures up to 250 °C Reduced maintenance costs and downtime due to the good thermal stability, sealing effect and resistance to media |
|
| Compensator and rollers in the hotflue | BARRIERTA L 55/2 | Fully synthetic high-temperature bearing grease with long-term stability |
| For temperatures up to 260 °C | ||
| Very resistant to aggressive chemicals and vapours | ||
| Considerably reduced maintenance due to long relubrication intervals | ||
| Klübertemp GR AR 555 Klübertemp HM 83-402 |
Fully synthetic high-temperature bearing grease with long-term stability | |
| For temperatures up to 250 °C | ||
| Very resistant to aggressive chemicals and vapours | ||
| Considerably reduced maintenance due to long relubrication intervals |
Asst. Manager - Business Support
18001237686
