Klüberbio EG 2-68

Tuotenumero: 009043 Synthetic high-performance gear oils meet the EAL requirements specified in Appendix A of the U.S. EPA 2013 Vessel General Permit (VGP); the applicable scope shall be specified.

Klüberbio EG 2 oils are biodegradable gear oils in accordance to OECD301 F based on synthetic ester oil.

Klüberbio EG 2 oils show a high shear stability and form a strong hydrodydamic oil film even when subject to high loads. They have a high scuffing resistance, protecting gear teeth reliably against fretting damage even at high peak loads.

Klüberbio EG 2 oils achieve the U.S. EPA's requirements for classification as an Environmentally Acceptable Lubricant (EAL). Therefore, these high-performance lubricants meet the biodegradability, minimally toxic, and non-bioaccumulating standards set in Appendix A of the U.S. EPA's 2013 VGP (Vessel General Permit).

Tärkeä huomautus koskien käyttöturvallisuustiedotteita / Vastuuvapauslauseke

Tässä latausosiossa tarjotut käyttöturvallisuustiedotteet (SDS) on tarkoitettu vain yleisiin tiedotustarkoituksiin. Teknisten päivitysten vuoksi emme voi taata, että verkossa saatavilla olevat tiedostot aina heijastavat ajantasaisinta tilannetta.

Ainoa oikeudellisesti sitova versio on käyttöturvallisuustiedote, joka toimitetaan suoraan sinulle oston tai tavaroiden toimituksen yhteydessä. Tämä asiakirja sisältää tuotettasi koskevat erityiset turvallisuustiedot.

Tarkista ennen käyttöä kaikki ladatut tiedostot verrattuna toimituksen mukana saamiisi asiakirjoihin. Emme ota vastuuta vahingoista, jotka johtuvat vanhentuneiden verkkoversioiden käytöstä, ellei vahinko ole aiheutunut tahallisesti tai törkeän huolimattomasti meidän puoleltamme.

Jos et ole varma, onko sinulla uusin versio tai tarvitset päivitetyn asiakirjan, ota rohkeasti yhteyttä asiakaspalveluumme.

Klüberbio EG 2-68

Käyttöedut sovellukseesi

  • Meets the EAL requirements stated in the text under Appendix A of the U.S. EPA 2013 Vessel General Permit; specify the applicable scope.
  • Klüberbio EG 2 oils have a high scuffing resistance, protecting gear teeth reliably against fretting damage even at high peak loads
  • Standard NBR and FKM elastomers of the leading propeller shaft seal manufacturers are resistant to and approved for use with Klüberbio EG 2 oils, preventing leakages and impurities

Ota yhteyttä

Autamme mielellämme yritysasiakkaita, liikekumppaneita ja ammattikäyttäjiä kaikissa Klüber Lubricationiin liittyvissä tiedusteluissa.
Odotamme yhteydenottoasi!

Lisätietoja tietojen käsittelystä tietosuojaselosteessa.