Klüber Gleitpan JF158 A/B Komp. A

Tuotenumero: 099197 Two-component PTFE bonded coating for metal components

Klüber Gleitpan JF 158 A/B is a thermosetting, dark-green high-performance bonded coating made up of two component parts. It has an organic binder containing PTFE as the solid lubricant.

Klüber Gleitpan JF 158 A/B reduces friction and wear on metal/metal and metal/plastic material pairings. This bonded coating can be used for high mechano-dynamic loads as well as with high temperatures (permanent temperatures up to 230 °C, short-term peaks up to 260 °C). The bonded coating is supplied in liquid form and with a viscosity ready to use. It contains an inflammable solvent mixture.

Once applied and hardened, the bonded coating forms a dry lubricating layer with a wide service temperature range, low friction coefficients and good resistance to wear. Its resistance to chemicals and anticorrosive effect are good.

Klüber Gleitpan JF 158 A/B excels due to its extraordinarily high wear resistance plus good adhesion on steel and aluminium substrates.

Klüber Gleitpan JF158 A/B Komp. A

Käyttöedut sovellukseesi

  • Long component life expectancy

    • for a wide service temperature range from -40 to +250 °C

    • especially in combination with oils or greases

    • due to a highly flexible bonded coating

    • coatings up to 100 μm thickness can be applied

  • Better component performance

    • due to less stick-slip

    • due to very high wear resistance

    • as lifetime lubrication is possible

Ota yhteyttä

Voit ottaa yhteyttä meidän asiakaspalveluun joko lomakkeella, soittaen (+358 (0)20 7497 970) tai sähköpostitse (klueber.fi@klueber.com). Odotamme saavamme sinulta viestin!

Saadaksesi lisätietoja, kuinka käytämme tietojasi yhteydenottopyynnöstä, ole hyvä ja tutustu tietosuojailmoitus.