Products

Article-No: 043050

PRESSPATE SEM 95/800 T

High-performance lubricants for cold forming of sheets and tubes

Product description

In your metal forming operations, the challenge is to find a reliable lubricant that protects tools against wear. Upon completion of the forming process, the lubricant should be easily removed.

In this respect, PRESSPATE SEM 95/800 T and PRESSPATE TB can offer optimal support. Both products offer excellent lubrication performance especially when used for the cold forming of thick or thin metal sheets or tubes. This ensures easier process start-up even under difficult ambient conditions leading to a reduction of reject rates.

Due to the very good lubricating performance, PRESSPATE SEM 95/800 T and PRESSPATE TB pastes can be applied in small quantities. Consequently, components are easy to clean using aqueous systems.

PRESSPATE SEM 95/800 T has been tried and tested with numerous applications. For more taxing bending processes requiring higher performance, PRESSPATE TB should be given preference.

Benefits for your application

  • Reduction of friction and wear, especially in deep-drawing and bending operations involving high degrees of deformation

  • Improving process stability for a lower reject rate

  • Increasing tool life; reduction of tooling costs and set-up times compared with conventional, fluid metal forming oils

  • Workpieces can be cleaned using conventional cleaning agents and processes