Press releases

Redefining performance limits

August 01. 2018

Redefining performance limits

Klüber Lubrication presents new speciality lubricants for the rail industry

Life cycle costs play a significant role in the rail industry. In particular, railway operators need to continuously optimise component and equipment operating costs. With its multitude of lubricants specially developed for the railway industry, Klüber Lubrication can help to extend oil change and relubrication intervals and increase the service life of components, thus reducing operating costs. Klüber Lubrication is showcasing its latest developments at the InnoTrans.

"Our guiding principle for development is always to conceive lubricants that allow components to have a significantly longer availability," explains Thomas Kamprath, Market Manager Rail Industry at Klüber Lubrication. "Our lubricants achieve relubrication intervals which are often twice as long as comparable competitor samples. Klüber Lubrication pushes the limits of what is possible."

Quickly applied, long-lasting

Challenges in the rail industry include door malfunctions, one of the main causes of train delays. The new BARRIERTA L 25 DL DISPERS has been specially developed for lubricating seals and washers on train doors. Based on the tried-and-tested BARRIERTA L 25 DL, this new lubricant is significantly more effective on application, reducing layer thickness on the seal surface by up to 50 %. This provides savings both on working times and cost of materials.

Prevents curve squeals

Adhesion, water resistance and effective spraying are key performance criteria for wheel flange lubricants. These characteristics are required to ensure that the lubricant is not flung outwards from the wheel at high speed or washed away by the rain, and that delivers its full performance, even at high ambient temperatures. The new Klüberrail ALE 92-2000 has been specially optimised for regions with high temperatures and for strong vibrations. This eco-friendly synthetic fluid grease is effective in reducing curve squeals and wear between the wheel and rails.

Halve the number of oil change intervals – optimise friction coefficients

When it comes to Klüber Lubrication gear oils, the focus is on the Klübersynth LEG 4 75 W 90 gear oil, specially developed for railway systems. This oil can be used to reduce the friction coefficient in transmissions by up to 30 %. The low-temperature train gear oil not only proves to be strong at temperatures down to –60 °C, but also delivers its full performance capacity at an oil sump temperature of 100 °C.

The innovative solutions that Klüber Lubrication offers the rail industry also include the tried-and-tested fully synthetic Klübersynth GE 4 75 W 90. It provides effective protection to gear components in rail vehicles. What makes this gear oil so special, though, is its chemical composition, which offers extensive oxidation stability and shear strength. This means that time-consuming oil change intervals can be considerably extended and trains are thus available for operation longer.

A million kilometres without relubrication

Klübersynth BHP 72-102 represents a milestone in lubricant development as a highly-efficient grease for traction motor bearings. In a joint project with Karlsruhe transport authorities, we managed to prove that relubrication intervals of a million kilometres or more are possible. Reaching this result allowed vehicle availability to be increased by 300 %, while costs for maintenance and repair were significantly reduced.

The Klüber Lubrication experts will be glad to answer all questions about tribology for trains and rails at InnoTrans 2018. Find them at Stand 415 in Hall 21.

About Klüber Lubrication

Klüber Lubrication is one of the world's leading manufacturers of speciality lubricants, offering high-end tribological solutions to virtually all industries and markets worldwide. Most products are developed and made to specific customer requirements. During its more than 80 years of existence, Klüber Lubrication has provided high-quality lubricants, thorough consultation and extensive services, which has earned it an excellent reputation in the market. The company holds all common industrial certifications and operates a test bay hardly rivalled in the lubricants industry.

Klüber Lubrication, set up as a retail company for mineral oil products in Munich in 1929, is today part of Freudenberg Chemical Specialities SE & Co. KG, a Business Unit of the Freudenberg Group, Weinheim. Klüber Lubrication has approximately 2000 employees in more than 30 countries.

For further information, please click http://www.klueber.com

About Freudenberg Chemical Specialities

Freudenberg Chemical Specialities develops, manufactures and markets chemical specialties. To be close to its customers, the company is represented globally in the market with its five brands, Klüber Lubrication, Chem-Trend, OKS, SurTec and Capol. Freudenberg Chemical Specialities is one of the global leading manufacturers of specialty lubricants, release agents, chemotechnical maintenance products, and solutions for surface and galvanic technologies. Headquartered in Munich, Germany, the Business Group runs its own companies in some 40 countries. In 2015, Freudenberg Chemical Specialities employed about 3,300 people and generated sales of about € 960 million. For more information, please visit http://www.fcs-munich.com

Press contact