News

Individual solutions to get you on the right track: Klüber Lubrication at the InnoTrans 2014 in Berlin

July 18. 2014

Individual solutions to get you on the right track: Klüber Lubrication at the InnoTrans 2014 in Berlin

Powerful speciality lubricants for highly reliable rail traffic

Munich, 18th July 2014 – Lubricants play a decisive role in the maintenance of railway components. To ensure that trains and rails work reliably under all weather conditions, equipment like doors, traction motors or brakes and the entire railway infrastructure must be maintained in optimum condition. Klüber Lubrication will be presenting its comprehensive range of powerful speciality lubricants for the railway industry under the motto "Get on the right track with our customised solutions" at the InnoTrans 2014 in Berlin in hall 21 A, stand 409.

"When developing lubricants for the rail sector, Klüber Lubrication is especially focused on making them environmentally friendly," says Thomas Kamprath, Market Manager Rail at Klüber Lubrication. "This is of particular importance for friction points where the contact with water or the ground cannot be ruled out."

An overview of new developments


Klüberrail ALO 32-250 is a new special lubricant for overhead power lines, which is highly adhesive to prevent dripping. As it is also highly resistant to water, this product ensures reliable lubrication between the current collector and the line, leading to lower wear and hence longer relubrication intervals. Klüberrail ALO 32 250 also helps reduce overhead line noise and vibration. The new speciality lubricant is biodegradable and therefore eco-friendly.

Fully synthetic high-performance gear oil


Klübersynth GE 4 75 W 90 for railway applications is a fully synthetic high-performance gear oil with high scuffing load capacity and micropitting resistance. The base oil's pronounced shear stability prevents the lubricant film from collapsing even under high loads, which is essential to protect both teeth and rolling bearings. Besides good protection against corrosion and wear, the oil offers good low-temperature behaviour as well as a high resistance to ageing and oxidation, which leads to considerably less frequent oil changes becoming necessary. Klübersynth GE 4 75 W 90 is approved by several gear manufacturers like IG Watteeuw, Voith Turbo, Siemens-Flender and by the German railway operator Deutsche Bahn.

STABURAGS NBU 30 PTM is a water-resistant assembly lubricant containing solid lubricants. In the rail industry, it is frequently used in bogie applications. "For the preload force of screw connections, the total friction coefficient plays a decisive role," Thomas Kamprath explains. "Screws lubricated with STABURAGS NBU 30 PTM have a friction coefficient of 0.09 < µ > 0.14, as stipulated in the standards DIN 25201 and VDI 2230. This was confirmed by comprehensive tests performed with M 16x 100 – 8.8 screws on the screw test rig. Especially for screws that have to be removed for equipment inspections it is important that they can be undone also after a longer period of operation. This is ensured by the very good resistance to water and media of STABURAGS NBU 30 PTM."

The wheel flange lubricant Klüberrail LEA 62-2000 ensures good wear protection for wheels and rails and reduces stick-slip effects on curves to reduce noise. The fluid grease provides excellent adhesion, making sure it stays on the wheel, even at high speeds. Furthermore, it offers very good water resistance. Klüberrail LEA 62 2000 is rapidly biodegradable according to OECD 301 F.

Klüberrail AL 32-3000 is a synthetic biodegradable speciality lubricant for setting railway points with small forces even at temperatures as low as minus 30 degrees. It combines very good resistance to water with good corrosion protection and a high resistance to UV radiation, which helps extend relubrication intervals considerably.

At the InnoTrans 2014 held in Berlin from 23 to 26 September, the experts from Klüber Lubrication will be pleased to answer all kinds of questions regarding the lubrication of railway components.


About Klüber Lubrication
Klüber Lubrication is one of the world's leading manufacturers of speciality lubricants, offering high-end tribological solutions to virtually all industries and markets worldwide. Most products are developed and made to specific customer requirements. During its more than 80 years of existence, Klüber Lubrication has provided high-quality lubricants, thorough consultation and extensive services, which has earned it an excellent reputation in the market. The company holds all common industrial certifications and operates a test bay hardly rivalled in the lubricants industry.
Klüber Lubrication, set up as a retail company for mineral oil products in Munich in 1929, is today part of Freudenberg Chemical Specialities SE & Co. KG, a Business Group of the Freudenberg Group, Weinheim. Klüber Lubrication has about 2.000 employees in more than 30 countries.

About Freudenberg Chemical Specialities
Freudenberg Chemical Specialities Munich, was founded in 2004 as a new Business Group within the Freudenberg Group, Weinheim, Germany, a family-owned, diversified technology company with a history of more than 160 years. Freudenberg Chemical Specialities has a lean, market-oriented organisation with Management Board and Corporate Functions. Its objective is to promote innovation potentials in its field of activities and to expand world-wide market leadership in special lubricants and release agents. The Business Group includes five largely independent divisions which are active in more than 50 countries: Klüber Lubrication, Chem-Trend, SurTec, Capol and OKS.

Press contact
Klüber Lubrication München SE & Co. KG
Andreas Hasslinger, Marketing Communications
Geisenhausenerstr. 7
81379 München
Phone: +49 (0) 89 / 78 76-467
E-Mail: andreas.hasslinger@klueber.com

mediaconnect
Michael Jurischka
Gotzkowskystr. 11
10555 Berlin
Phone: +49 (0) 30 / 28 44 95 95
E-Mail: m.jurischka@mediaconnect-berlin.de