Klübermatic STAR CONTROL

Individual automatic relubrication by means of external control

Klübermatic STAR CONTROL supplies the lubrication point with oil or grease immediately on starting – ensuring constant, accurate and temperature-independent lubrication.

Klübermatic STAR CONTROL supplies the lubrication point with oil or grease immediately on starting – ensuring constant, accurate and temperature-independent lubrication. Klübermatic STAR CONTROL is power-supplied directly from the machine it is connected to and can be linked up to the machine’s PLC unit for control and monitoring. Klübermatic STAR CONTROL automatically discharges a set amount of lubricant as long as it remains connected to power. The LC unit (LC = lubricant canister) is available with 60 cm³, 120 cm³ or 250 cm³ of lubricant.

Dispenser characteristics Your benefits
Machine-based control, e.g. via PLC
  • Flexible control and additional monitoring as the the lubricating system can be linked up to the machine

  • Connection to the machine enables automatic system switch on and off
  • Integration into fault alert system possible
  • Efficient lubricant use
Power supply from machine/installation
  • Constant power supply
  • No battery change required

Reusable drive

  • Accurate, lubrication point-specific metering
  • Transparent housing enables visual fill level inspection

Constant pressure build-up of max. 6 bar

  • Longer availability of installation as the change can take place during operation
  • Increased workplace safety due to automatic lubricant supply to lube points difficult to access, assembly is possible up to 5 metres outside the danger zone in an easily accessible place

System purges

  • Lubrication point can be flushed to dissolve blockages