Klüber Summit FG 200

Obj. č.: 050009 Fully synthetic compressor oils for the food-processing and pharmaceutical industries

Klüber Summit FG oils are special compressor oils developed for the food-processing and pharmaceutical industries. They are fully synthetic and can be mixed with mineral oil as well as other synthetic hydrocarbon oils.

Klüber Summit FG oils offer very good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators.

Klüber Summit FG oils are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüber Summit FG oils can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Důležité upozornění ohledně bezpečnostních listů / Prohlášení o vyloučení odpovědnosti

Bezpečnostní listy (SDS) poskytované v této sekci ke stažení slouží pouze pro obecné informační účely. V důsledku technických aktualizací nemůžeme zaručit, že soubory dostupné online vždy odrážejí nejaktuálnější stav.

Jediná právně závazná verze je bezpečnostní list, který Vám bude přímo předán při nákupu nebo při dodání zboží. Tento dokument obsahuje konkrétní bezpečnostní informace platné pro Váš dodaný produkt.

Před použitím prosím ověřte všechny stažené soubory oproti dokumentům, které jste obdrželi s dodávkou. Nepřebíráme žádnou odpovědnost za škody způsobené použitím zastaralých online verzí, pokud nebyly způsobeny úmyslně nebo hrubou nedbalostí z naší strany.

Pokud si nejste jisti, zda máte nejnovější verzi nebo potřebujete aktualizovaný dokument, neváhejte kontaktovat náš zákaznický servis na cs@cz.klueber.com nebo +420 234 714 710.

Klüber Summit FG 200

Výhody pro váš provoz

  • Klüber Summit FG oils are NSF H1 registered for use in the food-processing and pharmaceutical industries and comply with FDA 21 CFR Sec 178.3570
  • ISO 21469 certified – supports compliance with the hygienic requirements of your production. You will find further information about ISO Standard 21469 on our website www.klueber.com
  • Low maintenance and operating costs due to extended oil change intervals up to 5,000 operating hours in oil-injected screw-type compressors *
  • Easy compressor conversion from mineral to the synthetic Klüber Summit FG oils due to miscibility and compatibility with common seal materials **
  • Low tendency to evaporation and thus low impact of the oil vapour on the compressed air
  • Longer service of oils filters, activated carbon filters and oil separators
  • Excellent demulsifying behaviour and hence good water separation ability
  • Surpasses the requirements of DIN 51506-VDL and ISO 6743-3 L-DAJ (VG 32/46/68) / L-DAB (VG 100/150)

Buďte v kontaktu

Těšíme se na váš dotaz!