Loading, please wait ...
Contact us

If you have any questions about any of our solutions or services, please complete the form below. We’d love to hear from you!




Menu USA / Canada Blog Go to Klüber website

Food & Beverage Food-grade synthetic lubricating and high-temperature chain oils featured at PACK EXPO International

Klϋber Lubrication, a worldwide manufacturer of specialty lubricants, will showcase several of its food- and pharma-grade products at booth #8353 during PACK EXPO International 2014, Nov. 2-5 at McCormick Place in Chicago:

Klüberpharma UH1 4-220/4-460 are specially designed synthetic oils for the lubrication of steel punches and bronze guides in pharmaceutical tablet presses. These lubricating oils offer good wear protection, thus extending the service life of components. They also reduce the friction coefficient during the start-up of tablet presses and are compatible with bronze materials. This special property decreases the build up of black abrasion particles and as a result, significantly reduces tablet contamination. Klüberpharma UH1 4-220 has been used very successfully by leading tablet manufacturers for the lubrication of tablet punches.

Klüberfood NH1 C 8-80 is a semi-synthetic chain oil developed for the lubrication of chains operating in high humidity for conveyor and drive chains. Its formulation, incorporating a special additive package, enables significant friction reduction and good protection against wear and fretting corrosion particularly in the highly stressed pin/bush areas. Klüberfood NH1 C 8-80 has good chemical stability for acidic process and high humidity environments, such as pasta dryers or proofer ovens in the baking industry where other oils may contribute to residue build-up.

Klüberfood NH1 CH 2-220 is a fully synthetic, ester-based lubricant that can operate at extreme temperatures for longer periods of time and without residue build-up, all while protecting chain components from increased wear. Users benefit from dramatically reduced consumption, cleaner operations, reduced noise and no smoking when applying oil. The can manufacturing environment presents significant challenges for proper lubrication of chains, including high temperatures, high and low speeds, potential ingredient contamination and increased wear.

All aforementioned products are NSF ISO 21469 certified, as well as NSF H1 registered, and therefore comply with FDA 21 CFR § 178.3570.

Comment now

Your email address will not be published.

Comments

Be the first to comment!