Klübersynth MEG 4 is an advanced synthetic high-performance gear and multipurpose oil based on mPAO satisfying the growing requirements and increasing power density of modern gears. Klübersynth MEG 4 includes KlüberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
Klübersynth MEG 4 clearly exceeds CLP requirements according to DIN 51517-3. Corresponding gears can be switched to Klübersynth MEG 4 without prior consultation with the gear manufacturer provided the general application notes are observed.
Klübersynth MEG 4 offers high scuffing load capacity. Gears are sufficiently protected against scuffing even at extremely high peak loads, vibrations or oscillations. The excellent wear protection of both gears and rolling bearings ensures that the service life calculated for the lubricated components is achieved, leading to lower maintenance and repair costs. The oil's high micropitting resistance of GFT ≥ 10 according to FVA 54/7 offers sufficient protection to gears that are subject to high loads and would normally be susceptible to this type of damage.
Klübersynth MEG 4 offers a much longer service life than mineral oils due to the excellent ageing and oxidation resistance of the selected raw materials; thus service intervals can be extended and maintenance costs reduced. The product's low foaming tendency and anti-corrosive properties enable problem-free gear operation.
Freudenberg seals made of 72 NBR 902, 75 FKM 585 and 75 FKM 170055 are statically and dynamically resistant to Klübersynth MEG 4, preventing leakage and oil contamination.
The excellent viscosity-temperature behavior supports the formation of a sufficient lubricant film across a wide service temperature range, even at elevated and high temperatures. Therefore, a single viscosity grade can cover both very low and high temperatures in many applications.
The optimized friction behavior enabled by the carefully selected base oils and additives reduces power losses and improves application efficiency. This leads to lower oil temperatures and reduced energy consumption.
Klübersynth MEG 4 has been developed to fulfill the latest gear OEM requirements.The approvals, e.g. by Flender, are in progess.
By using Klübersynth MEG 4 you can benefit from several advantages that will help you save costs easily and efficiently.
* For further information, please see our flyer: KlüberComp Lube Technology – Gear oils meeting the highest requirements.