Klüberbio RM 2-150

Article-No: 009025 Environmentally compatible, synthetic stern tube oils

Klüberbio RM 2 oils are ultimately biodegradable oils for stern tubes based on synthetic ester oil showing very good ageing and oxidation stability.

Klüberbio RM 2 oils show a high shear stability and form a strong hydrodynamic oil film even when subject to high loads.

As the lubricants are biodegradable oil loss or leakage are less dangerous to the environment. Klüberbio RM 2 oils contain > 90 % of renewable raw materials and bear the European Ecolabel.

Attaining EU Ecolabel certification provides ship owners and/or operators with independent assurance that the product achieves the U.S. EPA's requirements for classification as an Environmentally Acceptable Lubricant (EAL). Therefore, these high-performance lubricants meet the biodegradability, minimally toxic, and non-bioaccumulating standards set in Appendix A of the U.S. EPA's VGP.

Important Notice Regarding Safety Data Sheets / Disclaimer

The Safety Data Sheets (SDS) provided in this download section are for general information purposes only. Due to technical updates, we cannot guarantee that the files available online reflect the most current status at all times.

The only legally binding version is the Safety Data Sheet transmitted directly to you upon purchase or delivery of the goods. This document contains the specific safety information valid for your delivered product.

Please verify any downloaded files against the documents received with your delivery before use. We accept no liability for damages resulting from the use of outdated online versions, unless caused by intent or gross negligence on our part.

If you are unsure whether you have the latest version or require an updated document, please do not hesitate to contact our Customer Service.

Klüberbio RM 2-150

Benefits for your application

  • Comply with the requirements for Environmentally Acceptable Lubricants as defined in Appendix A of the EPA 2013 VGP (Vessel General Permit)
  • Ultimately biodegradable and not toxic to marine organisms with more than 90% renewable raw materials
  • High operational reliability due to the formation of a strong, hydrodynamic oil film and a very good compatibility with FKM elastomers available from leading propeller shaft seal manufacturers.

Visit our Onlineshop

Our products are now even closer to you.

Get in touch

We look forward to receiving your message!

For further information about the processing of your data using the contact form, please refer to our privacy policy.