Lubricating greases

Speciality lubricating greases – as diverse as the requirements

Greases are the best choice if the lubricant is to stay in place at the friction point long term. Not only do they provide good lubrication; they also protect the friction point against external influences like splash water, humidity, contamination, corrosion and wear.

Our wide range of lubricating greases is comprised of the following types:

Lubricating greases for valves and fittings

Valves and fittings require lubrication for reliable operation. Klüber Lubrication has specifically developed the right lubricating grease for each medium, be it food, drinking water, gas or oxygen.

Selected greases for valves and fittings:
UNISILKON L 250 L
Klübersynth UH1 64-2403
UNISILKON LCA 3801
Klübersynth VR 69-252 N

Further solutions for these applications you find on our valves and fittings page.

Gear greases

Lubricants must provide a sealing effect where the gearbox construction is not completely oil tight. Fluid greases have a sealing effect, absorb pressure and protect against wear.

Selected greases for gears:
GRAFLOSCON C-SG 0 ULTRA
CENTOPLEX GLP 500
MICROLUBE GB 0
Klüberfood NH1 94-6000
Klüberbio LG 39-700

Further solutions for these applications you find on our gear page.

Greases for rolling and plain bearings

There are many geometrical designs and sizes of rolling bearings and they always require individual lubrication solutions. Lubricating greases are available for each requirement, high or low temperature resistance, high speeds, heavy-duty or food-grade applications.

Selected greases for rolling and plain bearings:
BARRIERTA KM 192
Klüberalfa BF 83-102
BARRIERTA L 55/2
Klüberplex BEM 41-141
Klübersynth BHP 72-102
Klübersynth BQP 72-82
Klüberquiet BQ 72-72
ISOFLEX NBU 15
Klüberspeed BF 72-23
BARRIERTA KL 092
ISOFLEX PDL 300
Klüberfood NH1 94-301
Klübersynth UH1 14-151
Klüberlectric BE 44-152

Further solutions for these applications you find on our rolling and plain bearings page.

Pneumatic greases

Pneumatic drives must start reliably and run smoothly. Furthermore, pneumatic greases must be compatible with seals. In cooperation with pneumatics and seal manufacturers, Klüber Lubrication developed speciality lubricants tailored to these requirements.

Selected greases for pneumatic:
Klübersynth AR 34-401
BARRIERTA KM 192

Greases for the lubrication of plastics

Plastic components are made of many different materials and used in various material combinations. Lubricants are expected to be compatible with plastics while offering good wear protection.

Selected greases for the lubrication of plastics: 
Klüberalfa RM 93-101
Klübersynth MR 96-31
Klübersynth LI 44-22

Contact greases

Electric contacts, switches and sensors require lubricating greases with a constantly low contact resistance. The contacts must also be protected against corrosion while attaining a high number of plug and contact cycles. Contact greases help fulfil these requirements.

Selected greases for Electric contacts, switches and sensors:  
Klüberlectric KR 44-102
Klüberlectric KR 44-402
Klüberalfa KRA 3-730

If you have any further questions, please send us an email. We look forward to receiving your message!